Normalize parameter names in configs

This commit is contained in:
Alexander Kachkaev 2018-04-06 03:38:03 -04:00 committed by Traefiker Bot
parent e74e7cf734
commit 66485e81b4
43 changed files with 123 additions and 123 deletions

View file

@ -53,7 +53,7 @@ filename = "boltdb.tmpl"
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/boltdb.crt"
# key = "/etc/ssl/boltdb.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).

View file

@ -53,7 +53,7 @@ prefix = "traefik"
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/consul.crt"
# key = "/etc/ssl/consul.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).

View file

@ -57,7 +57,7 @@ prefix = "traefik"
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/consul.crt"
# key = "/etc/ssl/consul.key"
# insecureskipverify = true
# insecureSkipVerify = true
# Override default configuration template.
# For advanced users :)

View file

@ -54,7 +54,7 @@ watch = true
# Optional
# Default: true
#
exposedbydefault = true
exposedByDefault = true
# Use the IP address from the binded port instead of the inner network one.
# For specific use-case :)
@ -69,7 +69,7 @@ usebindportip = true
# Optional
# Default: false
#
swarmmode = false
swarmMode = false
# Enable docker TLS connection.
#
@ -79,7 +79,7 @@ swarmmode = false
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/docker.crt"
# key = "/etc/ssl/docker.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).
@ -89,7 +89,7 @@ To enable constraints see [backend-specific constraints section](/configuration/
```toml
################################################################
# Docker Swarmmode configuration backend
# Docker Swarm Mode configuration backend
################################################################
# Enable Docker configuration backend.
@ -123,7 +123,7 @@ watch = true
# Optional
# Default: false
#
swarmmode = true
swarmMode = true
# Override default configuration template.
# For advanced users :)
@ -146,7 +146,7 @@ swarmmode = true
# Optional
# Default: true
#
exposedbydefault = false
exposedByDefault = false
# Enable docker TLS connection.
#
@ -156,7 +156,7 @@ exposedbydefault = false
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/docker.crt"
# key = "/etc/ssl/docker.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).

View file

@ -39,13 +39,13 @@ watch = true
#
refreshSeconds = 15
# AccessKeyID to use when connecting to AWS.
# Access Key ID to use when connecting to AWS.
#
# Optional
#
accessKeyID = "abc"
# SecretAccessKey to use when connecting to AWS.
# Secret Access Key to use when connecting to AWS.
#
# Optional
#

View file

@ -66,13 +66,13 @@ exposedByDefault = false
#
region = "us-east-1"
# AccessKeyID to use when connecting to AWS.
# Access Key ID to use when connecting to AWS.
#
# Optional
#
accessKeyID = "abc"
# SecretAccessKey to use when connecting to AWS.
# Secret Access Key to use when connecting to AWS.
#
# Optional
#
@ -95,7 +95,7 @@ secretAccessKey = "123"
# templateVersion = "2"
```
If `AccessKeyID`/`SecretAccessKey` is not given credentials will be resolved in the following order:
If `accessKeyID`/`secretAccessKey` is not given credentials will be resolved in the following order:
- From environment variables; `AWS_ACCESS_KEY_ID`, `AWS_SECRET_ACCESS_KEY`, and `AWS_SESSION_TOKEN`.
- Shared credentials, determined by `AWS_PROFILE` and `AWS_SHARED_CREDENTIALS_FILE`, defaults to `default` and `~/.aws/credentials`.

View file

@ -63,7 +63,7 @@ useAPIV3 = true
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/etcd.crt"
# key = "/etc/ssl/etcd.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).

View file

@ -114,7 +114,7 @@ If the service port defined in the ingress spec is 443, then the backend communi
!!! note
Please note that by enabling TLS communication between traefik and your pods, you will have to have trusted certificates that have the proper trust chain and IP subject name.
If this is not an option, you may need to skip TLS certificate verification.
See the [InsecureSkipVerify](/configuration/commons/#main-section) setting for more details.
See the [insecureSkipVerify](/configuration/commons/#main-section) setting for more details.
## Annotations

View file

@ -103,7 +103,7 @@ domain = "marathon.localhost"
# CA = "/etc/ssl/ca.crt"
# Cert = "/etc/ssl/marathon.cert"
# Key = "/etc/ssl/marathon.key"
# InsecureSkipVerify = true
# insecureSkipVerify = true
# DCOSToken for DCOS environment.
# This will override the Authorization header.

View file

@ -62,34 +62,34 @@ domain = "mesos.localhost"
# Optional
#
# [mesos.TLS]
# InsecureSkipVerify = true
# insecureSkipVerify = true
# Zookeeper timeout (in seconds).
#
# Optional
# Default: 30
#
# ZkDetectionTimeout = 30
# zkDetectionTimeout = 30
# Polling interval (in seconds).
#
# Optional
# Default: 30
#
# RefreshSeconds = 30
# refreshSeconds = 30
# IP sources (e.g. host, docker, mesos, netinfo).
#
# Optional
#
# IPSources = "host"
# ipSources = "host"
# HTTP Timeout (in seconds).
#
# Optional
# Default: 30
#
# StateTimeoutSecond = "30"
# stateTimeoutSecond = "30"
# Convert groups to subdomains.
# Default behavior: /foo/bar/myapp => foo-bar-myapp.{defaultDomain}

View file

@ -77,7 +77,7 @@ To enable constraints see [backend-specific constraints section](/configuration/
#
[rancher.metadata]
# Poll the Rancher metadata service for changes every `rancher.RefreshSeconds`.
# Poll the Rancher metadata service for changes every `rancher.refreshSeconds`.
# NOTE: this is less accurate than the default long polling technique which
# will provide near instantaneous updates to Traefik
#

View file

@ -42,7 +42,7 @@ refreshSeconds = 10
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/servicefabric.crt"
# key = "/etc/ssl/servicefabric.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
## Labels

View file

@ -53,7 +53,7 @@ prefix = "traefik"
# ca = "/etc/ssl/ca.crt"
# cert = "/etc/ssl/zookeeper.crt"
# key = "/etc/ssl/zookeeper.key"
# insecureskipverify = true
# insecureSkipVerify = true
```
To enable constraints see [backend-specific constraints section](/configuration/commons/#backend-specific).

View file

@ -38,14 +38,14 @@
# Optional
# Default: "2s"
#
# ProvidersThrottleDuration = "2s"
# providersThrottleDuration = "2s"
# Controls the maximum idle (keep-alive) connections to keep per-host.
#
# Optional
# Default: 200
#
# MaxIdleConnsPerHost = 200
# maxIdleConnsPerHost = 200
# If set to true invalid SSL certificates are accepted for backends.
# This disables detection of man-in-the-middle attacks so should only be used on secure backend networks.
@ -53,14 +53,14 @@
# Optional
# Default: false
#
# InsecureSkipVerify = true
# insecureSkipVerify = true
# Register Certificates in the RootCA.
# Register Certificates in the rootCA.
#
# Optional
# Default: []
#
# RootCAs = [ "/mycert.cert" ]
# rootCAs = [ "/mycert.cert" ]
# Entrypoints to be used by frontends that do not specify any entrypoint.
# Each frontend can specify its own entrypoints.
@ -76,19 +76,19 @@ Can be provided in a format supported by [time.ParseDuration](https://golang.org
If no units are provided, the value is parsed assuming seconds.
**Note:** in this time frame no new requests are accepted.
- `ProvidersThrottleDuration`: Backends throttle duration: minimum duration in seconds between 2 events from providers before applying a new configuration.
- `providersThrottleDuration`: Backends throttle duration: minimum duration in seconds between 2 events from providers before applying a new configuration.
It avoids unnecessary reloads if multiples events are sent in a short amount of time.
Can be provided in a format supported by [time.ParseDuration](https://golang.org/pkg/time/#ParseDuration) or as raw values (digits).
If no units are provided, the value is parsed assuming seconds.
- `MaxIdleConnsPerHost`: Controls the maximum idle (keep-alive) connections to keep per-host.
- `maxIdleConnsPerHost`: Controls the maximum idle (keep-alive) connections to keep per-host.
If zero, `DefaultMaxIdleConnsPerHost` from the Go standard library net/http module is used.
If you encounter 'too many open files' errors, you can either increase this value or change the `ulimit`.
- `InsecureSkipVerify` : If set to true invalid SSL certificates are accepted for backends.
- `insecureSkipVerify` : If set to true invalid SSL certificates are accepted for backends.
**Note:** This disables detection of man-in-the-middle attacks so should only be used on secure backend networks.
- `RootCAs`: Register Certificates in the RootCA. This certificates will be use for backends calls.
- `rootCAs`: Register Certificates in the RootCA. This certificates will be use for backends calls.
**Note** You can use file path or cert content directly
- `defaultEntryPoints`: Entrypoints to be used by frontends that do not specify any entrypoint.
@ -386,24 +386,24 @@ If no units are provided, the value is parsed assuming seconds.
### Idle Timeout (deprecated)
Use [respondingTimeouts](/configuration/commons/#responding-timeouts) instead of `IdleTimeout`.
Use [respondingTimeouts](/configuration/commons/#responding-timeouts) instead of `idleTimeout`.
In the case both settings are configured, the deprecated option will be overwritten.
`IdleTimeout` is the maximum amount of time an idle (keep-alive) connection will remain idle before closing itself.
`idleTimeout` is the maximum amount of time an idle (keep-alive) connection will remain idle before closing itself.
This is set to enforce closing of stale client connections.
Can be provided in a format supported by [time.ParseDuration](https://golang.org/pkg/time/#ParseDuration) or as raw values (digits).
If no units are provided, the value is parsed assuming seconds.
```toml
# IdleTimeout
# idleTimeout
#
# DEPRECATED - see [respondingTimeouts] section.
#
# Optional
# Default: "180s"
#
IdleTimeout = "360s"
idleTimeout = "360s"
```

View file

@ -15,28 +15,28 @@ Træfik supports two backends: Jaeger and Zipkin.
#
# Default: "jaeger"
#
Backend = "jaeger"
backend = "jaeger"
# Service name used in Jaeger backend
#
# Default: "traefik"
#
ServiceName = "traefik"
serviceName = "traefik"
[tracing.jaeger]
# SamplingServerURL is the address of jaeger-agent's HTTP sampling server
# Sampling Server URL is the address of jaeger-agent's HTTP sampling server
#
# Default: "http://localhost:5778/sampling"
#
SamplingServerURL = "http://localhost:5778/sampling"
samplingServerURL = "http://localhost:5778/sampling"
# Sampling Type specifies the type of the sampler: const, probabilistic, rateLimiting
#
# Default: "const"
#
SamplingType = "const"
samplingType = "const"
# SamplingParam Param is a value passed to the sampler.
# Sampling Param is a value passed to the sampler.
# Valid values for Param field are:
# - for "const" sampler, 0 or 1 for always false/true respectively
# - for "probabilistic" sampler, a probability between 0 and 1
@ -44,13 +44,13 @@ Træfik supports two backends: Jaeger and Zipkin.
#
# Default: 1.0
#
SamplingParam = 1.0
samplingParam = 1.0
# LocalAgentHostPort instructs reporter to send spans to jaeger-agent at this address
# Local Agent Host Port instructs reporter to send spans to jaeger-agent at this address
#
# Default: "127.0.0.1:6832"
#
LocalAgentHostPort = "127.0.0.1:6832"
localAgentHostPort = "127.0.0.1:6832"
```
## Zipkin
@ -62,36 +62,36 @@ Træfik supports two backends: Jaeger and Zipkin.
#
# Default: "jaeger"
#
Backend = "zipkin"
backend = "zipkin"
# Service name used in Zipkin backend
#
# Default: "traefik"
#
ServiceName = "traefik"
serviceName = "traefik"
[tracing.zipkin]
# Zipking HTTP endpoint used to send data
#
# Default: "http://localhost:9411/api/v1/spans"
#
HTTPEndpoint = "http://localhost:9411/api/v1/spans"
httpEndpoint = "http://localhost:9411/api/v1/spans"
# Enable Zipkin debug
#
# Default: false
#
Debug = false
debug = false
# Use ZipKin SameSpan RPC style traces
#
# Default: false
#
SameSpan = false
sameSpan = false
# Use ZipKin 128 bit root span IDs
#
# Default: true
#
ID128Bit = true
id128Bit = true
```